RESUMO Nanocompósitos de polietileno linear de baixa densidade com argila montmorilonita organofílica (OMMT) de fonte brasileira foram obtidos com o objetivo de avaliar as propriedades físico-químicas. Foram produzidos e caracterizados nanocompósitos obtidos por extrusão nas concentrações 2, 2,5, 3, 3,5% e o polímero puro. As misturas foram injetadas e caracterizadas. As análises de TGA mostraram que a adição de nanoargila elevou a estabilidade térmica das amostras, principalmente a PELBD/OMMT2,0, cujo aumento foi de 5,6% comparado ao Branco. O DSC demonstrou que a incorporação não influenciou na temperatura de fusão com relação a amostra pura do PELBD, entretanto, aumentou o grau de cristalinidade das amostras, destacando-se a amostra PELBD/OMMT2,5 que apresentou grau de cristalinidade 9,48% maior que o branco. Os resultados de flamabilidade mostraram que a amostra PELBD/OMMT2,0 apresentou diminuição de 38% na velocidade de propagação de chama. No ensaio de tração, percebeu-se um aumento na rigidez das amostras com adição de OMMT, aumentando o módulo de Young e diminuindo o alongamento na ruptura com o aumento percentual de OMMT. Já a técnica de RMN mostrou que as amostras de até 2,5% de OMMT sugere a formação de um nanocompósito esfoliado, resultados comprovados por MEV/FEG, na qual amostras injetadas com uma quantidade superior a 2,5% de argila apresentaram as mesmas características de delaminação.
ABSTRACT Low density linear polyethylene nanocomposites with organophilic montmorillonite clay (OMMT) from Brazilian source were obtained with the objective of evaluating the physicochemical properties. Nanocomposites obtained by extrusion at the concentrations 2, 2.5, 3, 3.5% and the pure polymer were produced and characterized. The mixtures were injected and characterized. The TGA analyzes showed that the addition of nanoclay considerably increased the thermal stability of the samples, especially the PELBD/OMMT2,0, which increase was of 5.6% compared to White. Through DSC it was found that the samples with nanoclay incorporation suffered no change in melting temperature in relation to the pure sample of LLDPE, however, the incorporation of clay increased the degree of crystallinity of the samples, especially for the LLDPE/OMMT2,5 sample that showed a 9,48 % degree of crystallinity higher than the white one. The flammability results revealed that the LLDPE/OMMT2,0 sample showed a decrease of 38 % in the flame propagation velocity. In the tensile test it was noticed an increase in stiffness of the samples with addition of OMMT compared to the White one, increasing the Young's modulus and decreasing the elongation at fracture with the percentage increase of OMMT. On the other hand, the NMR technique showed that the samples of up to 2,5% of OMMT suggests the formation of an exfoliated nanocomposite.